How-To & Tips · 2 min read

Open Cell Spray Foam in Converse, TX: The Practical Guide

Homeowners in Converse, TX often look into open cell spray foam for their properties. Open cell spray foam is a major project for any residential building. Charis Insulation Co installs open cell spray foam throughout Converse, TX on a regular basis. Property owners often ask what parts of open cell spray foam projects can be completed as a do-it-yourself task and when a professional contractor is needed. Open cell spray foam requires precise mixing, commercial equipment, and proper safety gear. Charis Insulation Co provides open cell spray foam services for homes in Converse, TX, and we make sure property owners understand the exact work involved in these installations.

← Back to Blog Completed open cell spray foam work at a residential property in Converse, TX

Ever walk into your attic in the middle of July and feel like you just stepped inside an oven? Down here in Converse, Texas, our summer heat is very intense, and keeping your house cool can feel like an expensive uphill battle. Open Cell Spray Foam Insulation is one of the best ways to tackle that problem, but getting Open Cell Spray Foam Insulation installed right takes some planning.

Before the crew ever shows up at your door, you have some homework to do. Clear out all the old, dusty batts and junk you have been storing up in the rafters for a decade. You do not want your storage boxes trapped under a wall of Open Cell Spray Foam Insulation. Make sure your roof is not leaking, either. Open Cell Spray Foam Insulation seals everything tight, and the last thing you want is to trap moisture from an active leak inside your wood framing. If you live in an older ranch-style home out near the Converse City Park area, check your electrical wiring too. Old knob-and-tube wiring needs to be replaced before any Open Cell Spray Foam Insulation goes in.

During the actual installation day, your job is very simple: stay out of the way and keep the pets outside. The chemical reaction happening while they are spraying creates fumes and requires proper ventilation. At Charis Insulation Co, we always tell people to plan on being out of the house for at least 24 hours while the Open Cell Spray Foam Insulation cures and the air clears completely. Trying to do this stage yourself with a small kit from the hardware store is a recipe for disaster. Professional rigs use high-pressure proportioners to mix the chemicals right. If the mix is even a little bit off, the Open Cell Spray Foam Insulation will not cure properly, it will stay sticky, and it can give off a terrible chemical smell that lingers for months.

What You Can Handle Yourself

  • Clearing out old Open Cell Spray Foam Insulation material, debris, and junk from the work area.
  • Hiring a roofing contractor to fix loose shingles or flashing beforehand.
  • Sealing up any obvious gaps or cracks around exterior doors and windows.
  • Arranging alternative lodging for your family and pets on application day for Open Cell Spray Foam Insulation.

After the Open Cell Spray Foam Insulation is in and cured, your home is going to feel very different. Your AC unit will not have to cycle constantly through the afternoon heat, which saves your equipment from burning out early. Take a walk up to the attic a week later just to inspect the Open Cell Spray Foam Insulation coverage and make sure no vents got accidentally blocked. Keep an eye on your monthly electric bill because the drop is usually very noticeable. If you ever need advice on upgrading your home envelope with Open Cell Spray Foam Insulation, call Charis Insulation Co for Open Cell Spray Foam Insulation work in Converse, Texas.

Ready to Get Started in Converse?

Contact Charis Insulation Co today for a free, no-obligation estimate on your project.

Get Your Free Quote